How To Repair Samsung Galaxy Tab 3
Repair guide : Dwelling button Galaxy Tab 3 x.1
Level : Very hard Time : 65 min Author : Alexandre
180 people have done this repair successfully ! Why non y'all?
Can not return to your tablet's homepage, quit applications or actuate S-Voice 'The abode button of your Samsung Galaxy Tab 3 10.1' may be stuck or broken! If y'all are hither, you are in the right place to stop this spiral that is ruining your life! Follow our illustrated repair guide to repair and supplant the domicile button on your tablet for up to three times cheaper than going through a professional!
Symptoms:
- Stuck dwelling house push button
- Home push damaged
Some advice before yous starting time
Recommended repair kit
Required spare parts
Step ane
Before moving the Domicile push on your Galaxy Tab iii 10.i, information technology is necessary for obvious security reasons to plow it off.
For this, press the ignition push button for a few seconds then confirm the extinction with "Switch off".
Footstep 2
Insert an iSesamo spatula into the upper left shelf gap between the back beat out and the main frame and gently pry off the rear shell.
Perform this operation on the unabridged left side of the tablet.
Footstep 3
Repeat the previous step by unclipping the bottom side of the tablet.
Pace 4
Continue past unclipping the right side of the tablet.
Step 5
Keep using the iSesamo spatula past unclipping the top of the tablet.
Step vi
Grasp the back shell and remove it.
The back cover of your Galaxy Tab 3 10.1 is now disassembled.
Stride seven
Use the tip of the nylon spatula to gently unclip the bombardment connector by levering it.
Step viii
Then insert the iSesamo Spatula into the outer screen-frame gap on the lower right side of the tablet.
So gently pry to unclip the outer frame at this indicate.
Step nine
Repeat on the correct side of the tablet.
Step ten
Then continue unclipping the outer frame on the tiptop of the tablet.
Pace 11
Finally unclip the left side of the outer frame, again using the iSesamo spatula.
Step 12
And then grasp the outer frame and remove it.
The outer frame of your Galaxy Tab three 10.one is now disassembled.
Pace 13
Use the spudger once more to unlock the touch screen cablevision connector.
And then remove the cable from its socket.
Step 14
You must heat the touch screen for three to 5 minutes with a hairdryer in social club to peel information technology (crimson parts)
The touch on screen has been very solidly glued to the frame. Nosotros recommend that y'all regularly heat the touch creen equally nosotros become along the steps. It will be easier.
Be very gentle when peeling off the touch screen, it is made of drinking glass and thus it is relatively fragile and sensitive, there is a loftier risk of breakeages.
Step 15
Insert the nylon spatula on the left side of the tablet and gently slide it down to loosen the left side of the glass.
Step 16
And then repeat the performance, this time on the underside of the tablet, avoiding damaging the connector of the glass.
Stride 17
Finally, continue and cease with the correct side of the tablet, still using the nylon spatula.
Step 18
Open the glass like a volume.
And so gently remove information technology.
If the glass does non come up off at the acme, reheat this office for one to two minutes.
The touch screen of your Milky way Tab 3 ten.i is now disassembled.
Step 19
Utilize the nylon spatula to remove the home button from the chassis.
Step twenty
The dwelling button of your Galaxy Tab 3 10.one is now disassembled.
Replace it with a new i if necessary.
Recommended repair kit
Required spare parts
Source: https://www.sosav.com/guides/tablets/samsung-tablets/tab3-10-1/home-button/
0 Response to "How To Repair Samsung Galaxy Tab 3"
Post a Comment